Road Cleaning
Convoluted Wafer Ring Brush
Replaceable flat wafer and sweeper segment rings for road sweeping brush assemblies.
Listed options21 in — medium grade · 21 in — high grade
Explore productStudio-retouched product views. Refer to the confirmed drawing for exact dimensions and construction.
Road Cleaning / Manufacturer in India
Steel Wire Wafer Ring Brush
A steel-wire wafer segment for compatible sweeper roller assemblies. This ring must be matched by inside diameter, outside diameter and the machine’s retention system.
- Construction
- Steel-wire fill in a wafer-ring format
- Configuration
- 21 in nominal size
- Application
- Compatible wire-fill sweeper assemblies
Specify the right fit for your machine.
Share a drawing or sample, operating conditions and quantity.
What this brush is designed to do
Wire-filled wafer rings are a different construction from a polymer sweeping ring and should only be used where the machine and work surface allow them. Assembly details matter: drive engagement, ring packing and the finished brush width must all correspond to the arbor. Select the wire construction from the application rather than substituting it solely because the nominal diameter matches.
Construction & material
Steel-wire fill in a wafer-ring format
Technical name: Convoluted Steel Wire Wafer / Wire Brush Segment / Steel Wire Sweeper RingListed sizes & specification options
| Parameter | Configuration |
|---|---|
| Product format | Convoluted Steel Wire Wafer / Wire Brush Segment / Steel Wire Sweeper Ring |
| Construction | Steel-wire fill in a wafer-ring format |
| Listed option 1 | 21 in nominal size |
| Details to confirm | Wire type and diameter, ring centre and OD; drive engagement, permitted operating speed and work surface |
Listed dimensions are reference configurations. Final bore, mounting, material grade and operating suitability are confirmed for your order.
Send your dimensions for matching ↗Measure the ring and complete stack arrangement
Record the steel-wire ring geometry and the complete stack. Specify the wire type and section separately from ring dimensions; include the machine operating limits.
Use one unit system and label required dimensions separately from worn measurements. Isolate the equipment before inspection; mark inaccessible dimensions as unknown.
| Detail to record | How to record it |
|---|---|
| Ring outside diameter | Record the diameter across the bristle tips without compressing them. Distinguish the worn ring from the required replacement size. |
| Inside diameter | Measure the clear centre opening separately from any inward drive pins, notches or keys; draw non-circular openings. |
| Drive engagement | Dimension the location, number and shape of pins, notches, keys or other drive features. Include an end view of the mating core. |
| Axial ring width | Measure the ring envelope along the shaft axis, including any formed centre profile. Do not confuse axial width with outside diameter or material thickness. |
| Profile and spacer arrangement | Identify flat, convoluted or conical construction. Show orientation, spacer dimensions and the nesting sequence used on the machine. |
| Core length and ring quantity | Give the usable stack length, required ring count and end-retention arrangement. Record a complete replacement set separately from loose ring quantity. |
Photographs to include
- Provide a straight-on view of the entire ring and a close view of its centre drive.
- Photograph the ring edge-on to show its axial profile and any spacer.
- Show the core and complete ring stack, including end retention and assembly order.
Where it fits in the process
01
Compatible wire-fill sweeper assemblies
02
Replacement steel-wire ring stacks
03
Specified heavy-debris sweeping duties
Application examples describe the product family. Machine compatibility depends on the final specification.
Four details that make a better enquiry
- Photograph the mounting or drive faces.
- Measure the unworn fixing dimensions separately from the bristle-tip diameter.
- Specify debris, work surface and machine model.
- Confirm assembly order, speed limits and required quantity.
For this product, pay particular attention to:
Wire type and diameter, ring centre and OD; drive engagement, permitted operating speed and work surface.
Frequently asked questions
Does a steel wire wafer replace a polymer wafer directly?
Only when the sweeper specification allows that fill and arrangement. Match the ring bore, drive, width and stack sequence, then confirm wire suitability for the surface and operating conditions.
Can steel-wire rings be mixed with polymer rings?
Only if the sweeper’s approved assembly specification permits that arrangement. Confirm the ring order, finished width, retention method and application with the machine manufacturer or your engineering team.
What information is needed to quote this steel wire wafer ring?
Send a sample or drawing, required quantity and the operating conditions. For this product, include: Wire type and diameter, ring centre and OD; drive engagement, permitted operating speed and work surface.
Can the listed configuration be matched to my machine?
The listed options are starting configurations, not universal machine approvals. IndusBrush confirms the final dimensions, mounting and material specification against your drawing or sample before manufacture.
Wire wafer ring or complete wire side broom?
A wire wafer is one section of a core-mounted broom stack. A side broom has a mounting plate and a different working position. On a wafer order, specify bore, drive, profile, spacer arrangement and required ring quantity.
- Steel Wire Side Broom ↗
Compare the plate-mounted side-broom construction.
- Convoluted Wafer Ring Brush ↗
Compare the formed ring profile and the required fill independently.
Related terminology: wire broom wafer; steel sweeper ring. Confirm the actual construction and fit, as similar names do not establish compatibility.
Export specification: steel-wire wafer stacks for sweeper rollers
Request this brush from IndusBrush, India, for steel-wire wafer stacks for sweeper rollers. Include the following details so the supplied configuration can be reviewed against your equipment.
- Wire type and diameter, ring outside and inside dimensions
- Drive engagement and complete stack arrangement
- Machine speed limits, working surface and ring quantity
State sample and production quantities separately, with destination country and city or port. Packing, material documents, commercial terms and delivery arrangements are agreed in the quotation.
International ordering & export requirements ↗
Compare Road Cleaning brush applications ↗
Inspection & care
Inspect fixings, drive engagement and worn or loose filaments with the machine isolated. Follow the sweeper maker’s replacement and operating instructions.
Technical reading & application context
These independent references explain general brush technology. They do not certify or specify an IndusBrush product; the listed configurations and final quotation define the supplied item.
Explore the range
Road Cleaning Brushes
Explore product photographs and listed configurations, then share your machine requirements.
Road Cleaning
Interlocking Sweeper Disc Brush
Keyed roller disc with an interlocking plastic core for road sweeper brush assemblies.
Listed options21 in nominal size; bore and drive profile to match
Explore product
Representative image
Road Cleaning
Conical / Flat Wafer Brush Disc
Wafer ring brush disc for road sweeper applications.
Listed optionsNominal ring size and profile to confirm from the sample
Explore productSteel Wire Wafer RingGet a quote ↗