Road Cleaning
Steel Wire Wafer Ring Brush
Convoluted steel wire brush segments for sweeper roller assemblies.
Listed options21 in nominal size
Explore productStudio-retouched product views. Refer to the confirmed drawing for exact dimensions and construction.
Road Cleaning / Manufacturer in India
Convoluted Wafer Ring Brush
A replaceable ring segment for building up a sweeper brush assembly. Convoluted wafer geometry and the matching arbor determine how the rings form the working brush face.
- Construction
- Convoluted wafer / sweeper ring format
- Configuration
- 21 in — medium grade · More options below
- Application
- Bucket and attachment sweepers
Specify the right fit for your machine.
Share a drawing or sample, operating conditions and quantity.
What this brush is designed to do
Wafer rings are assembled along a shaft or core, making the ring dimensions and assembly pattern important to fit. A nominal outside diameter does not establish the centre opening or drive arrangement. The supplied range lists medium and high grades at the same nominal size; confirm what differs in the filament and construction before selecting a grade.
Construction & material
Convoluted wafer / sweeper ring format
Technical name: Convoluted Wafer Brush / Flat Wafer Ring / Sweeper Segment RingListed sizes & specification options
| Parameter | Configuration |
|---|---|
| Product format | Convoluted Wafer Brush / Flat Wafer Ring / Sweeper Segment Ring |
| Construction | Convoluted wafer / sweeper ring format |
| Listed option 1 | 21 in — medium grade |
| Listed option 2 | 21 in — high grade |
| Details to confirm | Outside diameter, inside diameter, drive notch or pin; shaft length, ring count, spacing and grade |
Listed dimensions are reference configurations. Final bore, mounting, material grade and operating suitability are confirmed for your order.
Send your dimensions for matching ↗Measure the ring and complete stack arrangement
Show the formed centre and nesting direction edge-on. A convoluted ring can occupy a different axial stack width from a flat ring with the same outside diameter.
Use one unit system and label required dimensions separately from worn measurements. Isolate the equipment before inspection; mark inaccessible dimensions as unknown.
| Detail to record | How to record it |
|---|---|
| Ring outside diameter | Record the diameter across the bristle tips without compressing them. Distinguish the worn ring from the required replacement size. |
| Inside diameter | Measure the clear centre opening separately from any inward drive pins, notches or keys; draw non-circular openings. |
| Drive engagement | Dimension the location, number and shape of pins, notches, keys or other drive features. Include an end view of the mating core. |
| Axial ring width | Measure the ring envelope along the shaft axis, including any formed centre profile. Do not confuse axial width with outside diameter or material thickness. |
| Profile and spacer arrangement | Identify flat, convoluted or conical construction. Show orientation, spacer dimensions and the nesting sequence used on the machine. |
| Core length and ring quantity | Give the usable stack length, required ring count and end-retention arrangement. Record a complete replacement set separately from loose ring quantity. |
Photographs to include
- Provide a straight-on view of the entire ring and a close view of its centre drive.
- Photograph the ring edge-on to show its axial profile and any spacer.
- Show the core and complete ring stack, including end retention and assembly order.
Where it fits in the process
01
Bucket and attachment sweepers
02
PTO sweeper brush assemblies
03
Segmented replacement broom builds
Application examples describe the product family. Machine compatibility depends on the final specification.
Four details that make a better enquiry
- Photograph the mounting or drive faces.
- Measure the unworn fixing dimensions separately from the bristle-tip diameter.
- Specify debris, work surface and machine model.
- Confirm assembly order, speed limits and required quantity.
For this product, pay particular attention to:
Outside diameter, inside diameter, drive notch or pin; shaft length, ring count, spacing and grade.
Frequently asked questions
Can a convoluted wafer replace a flat wafer?
The formed ring changes spacing and stack arrangement. Check wave profile, assembled width, core drive and end retention. Do not replace a flat-ring stack using only the outside diameter as a match.
Do convoluted rings use the same spacers as flat wafers?
Do not assume they do. The axial shape, assembly pitch and machine design determine the required ring-and-spacer arrangement. Send a side view of the installed stack and the arbor dimensions.
What information is needed to quote this convoluted wafer ring brush?
Send a sample or drawing, required quantity and the operating conditions. For this product, include: Outside diameter, inside diameter, drive notch or pin; shaft length, ring count, spacing and grade.
Can the listed configuration be matched to my machine?
The listed options are starting configurations, not universal machine approvals. IndusBrush confirms the final dimensions, mounting and material specification against your drawing or sample before manufacture.
A formed wafer stack or a mounted side broom?
A convoluted wafer forms part of a stack along a sweeper core. Its formed profile affects nesting and spacing. Confirm the actual ring geometry, drive engagement and assembly order rather than treating every ring of the same diameter as interchangeable.
- Conical / Flat Wafer Brush Disc ↗
Compare the profiled wafer format and confirm which ring geometry is required.
- Interlocking Sweeper Disc Brush ↗
Compare a keyed interlocking assembly as a different replacement system.
Related terminology: wavy sweeper wafer ring; convoluted broom wafer. Confirm the actual construction and fit, as similar names do not establish compatibility.
Export specification: replacement convoluted sweeper wafer stacks
Request this brush from IndusBrush, India, for replacement convoluted sweeper wafer stacks. Include the following details so the supplied configuration can be reviewed against your equipment.
- Outside and inside diameters and drive-notch or pin drawing
- Wave profile, axial spacing and nesting orientation
- Core working length, ring count and required grade
State sample and production quantities separately, with destination country and city or port. Packing, material documents, commercial terms and delivery arrangements are agreed in the quotation.
International ordering & export requirements ↗
Compare Road Cleaning brush applications ↗
Inspection & care
Inspect fixings, drive engagement and worn or loose filaments with the machine isolated. Follow the sweeper maker’s replacement and operating instructions.
Technical reading & application context
These independent references explain general brush technology. They do not certify or specify an IndusBrush product; the listed configurations and final quotation define the supplied item.
Explore the range
Road Cleaning Brushes
Explore product photographs and listed configurations, then share your machine requirements.
Road Cleaning
Interlocking Sweeper Disc Brush
Keyed roller disc with an interlocking plastic core for road sweeper brush assemblies.
Listed options21 in nominal size; bore and drive profile to match
Explore product
Representative image
Road Cleaning
Conical / Flat Wafer Brush Disc
Wafer ring brush disc for road sweeper applications.
Listed optionsNominal ring size and profile to confirm from the sample
Explore productConvoluted Wafer Ring BrushGet a quote ↗