Studio-retouched product views. Refer to the confirmed drawing for exact dimensions and construction.
A wood-backed strip brush with natural coconut coir fibre. The listed configurations include a 40-inch nominal length and different wood options.
Share a drawing or sample, operating conditions and quantity.
Coir provides a visibly coarse natural-fibre brush face. The wooden block determines how the strip is fixed to the machine, while tuft spacing, trim and fibre condition affect the brushing contact. Specify the surface and duty so this product is not confused with a softer Tampico strip or a synthetic washing brush.
Natural coconut coir fibre in a wooden backing
Technical name: Natural Coconut Coir Fiber Wooden Strip Brush / Coir Board Brush| Parameter | Configuration |
|---|---|
| Product format | Natural Coconut Coir Fiber Wooden Strip Brush / Coir Board Brush |
| Construction | Natural coconut coir fibre in a wooden backing |
| Listed option 1 | 40 in nominal length — normal wood |
| Listed option 2 | 40 in nominal length — Marendi wood |
| Details to confirm | Block length, width, depth and fixing holes; coir trim, row pattern and moisture exposure |
Listed dimensions are reference configurations. Final bore, mounting, material grade and operating suitability are confirmed for your order.
Send your dimensions for matching ↗Record wood dimensions separately from the coir trim and splay. Identify the existing wood option and any swelling or wear rather than treating a worn backing as the intended replacement size.
Use one unit system and label required dimensions separately from worn measurements. Isolate the equipment before inspection; mark inaccessible dimensions as unknown.
| Detail to record | How to record it |
|---|---|
| Backing length | Measure the wooden block end to end; identify any unbristled end allowance separately. |
| Backing width | Measure the block across the bristled face, without including filaments that spread beyond its edges. |
| Backing depth | Measure the wood alone, from the bristled face to the opposite backing face; show any stepped or shaped section. |
| Exposed bristle trim | Measure from the bristled backing face to the tips without compressing the fill. For more than one bristled face, label each face separately. |
| Tuft rows and working face | Record the number and arrangement of rows, the bristled face or faces and any gaps or unfilled areas. A close-up photograph helps identify the layout. |
| Mounting-hole positions | Give hole diameters and positions from one identified end and side of the backing. Include slots, countersinks or clamps where present. |
Application examples describe the product family. Machine compatibility depends on the final specification.
Block length, width, depth and fixing holes; coir trim, row pattern and moisture exposure.
Both are plant-fibre fills, but they are different materials. Specify coir when replacing a coir brush, and confirm trim, density and contact requirements before changing the material.
No. Coir and Tampico are different natural fibres. Match the actual material, brushing action and block dimensions rather than selecting a strip by its wooden backing alone.
Send a sample or drawing, required quantity and the operating conditions. For this product, include: Block length, width, depth and fixing holes; coir trim, row pattern and moisture exposure.
The listed options are starting configurations, not universal machine approvals. IndusBrush confirms the final dimensions, mounting and material specification against your drawing or sample before manufacture.
This strip uses coconut coir on a rigid wooden backing. Match the working contact, wood section, projection and mounting before choosing a different fill. A shared nominal length does not establish equal brushing action.
Compare the nylon-filled wooden strip construction.
Compare the Tampico polishing strip for its specific reel application.
Related terminology: coir strip brush; wood-backed coconut fibre brush. Confirm the actual construction and fit, as similar names do not establish compatibility.
Request this brush from IndusBrush, India, for wood-backed coir strip-brush replacement. Include the following details so the supplied configuration can be reviewed against your equipment.
State sample and production quantities separately, with destination country and city or port. Packing, material documents, commercial terms and delivery arrangements are agreed in the quotation.
International ordering & export requirements ↗
Compare Food & Process brush applications ↗
Inspect for wear, loose filaments and trapped product. The cleaning method and complete brush construction must suit the plant’s hygiene and product-contact requirements.
These independent references explain general brush technology. They do not certify or specify an IndusBrush product; the listed configurations and final quotation define the supplied item.
Explore product photographs and listed configurations, then share your machine requirements.
Flat tufted wooden strip brush for seed grader sieve and screen cleaning.
Listed optionsNormal wood — section and brush projection to confirm · Marendi wood — section and brush projection to confirm
Explore product
Wooden brush strip for plansifter sieve cleaning, bran dusters and roller flour mill conveyor sweeping.
Listed options40 in nominal length — normal wood · 40 in nominal length — Marendi wood
Explore product
Mexican Tampico fibre wooden strip brush for dal polishing reels.
Listed options2.5 in nominal brush width / 42 in wood length · 1.5 in nominal brush width / 42 in wood length
Explore product