2 views
Textile
Flexible Tufted Brush Belt
Flexible tufted belt brush for timing-belt and stenter machine applications.
Listed options1 ft catalogue length unit; finished belt length to specify
Explore productStudio-retouched product views. Refer to the confirmed drawing for exact dimensions and construction.
Textile / Manufacturer in India
Hollow-Core Textile Roller Brush
A nylon cylinder brush with a hollow core for textile shaft applications. The technical product name identifies a 20 mm bore format; the shaft fit and working length still need confirmation.
- Construction
- Nylon filaments on a hollow cylindrical core
- Configuration
- 20 mm nominal bore format; working length and shaft fit to confirm
- Application
- Textile shaft roller replacement
Specify the right fit for your machine.
Share a drawing or sample, operating conditions and quantity.
What this brush is designed to do
This roller format provides brushing contact around a machine shaft. Core support, drive engagement and bristle layout are separate selection details: a matching bore alone does not guarantee the working brush will reach the intended surface. Confirm whether the duty is lint removal, light cleaning or another fabric-contact position.
Construction & material
Nylon filaments on a hollow cylindrical core
Technical name: Hollow Core Nylon Cylindrical Roller Brush / 20mm Bore Textile Shaft RollerListed sizes & specification options
| Parameter | Configuration |
|---|---|
| Product format | Hollow Core Nylon Cylindrical Roller Brush / 20mm Bore Textile Shaft Roller |
| Construction | Nylon filaments on a hollow cylindrical core |
| Listed option 1 | 20 mm nominal bore format; working length and shaft fit to confirm |
| Details to confirm | Actual shaft diameter and fit, drive key or clamp, brush face length and OD; required tuft pattern and trim |
Listed dimensions are reference configurations. Final bore, mounting, material grade and operating suitability are confirmed for your order.
Send your dimensions for matching ↗Measure the roller and its mounting
This worksheet distinguishes a hollow-core brush sleeve from its supporting shaft. A nominal bore label does not confirm the actual shaft fit or retention.
Use one unit system and label required dimensions separately from worn measurements. Isolate the equipment before inspection; mark inaccessible dimensions as unknown.
| Detail to record | How to record it |
|---|---|
| Brush face length | Measure along the axis between the start and end of the bristled working face; exclude exposed shaft ends. |
| Brush outside diameter | Record the diameter across the bristle tips without compressing them. Identify whether it is a worn measurement or a required replacement diameter. |
| Core outside diameter | Record the diameter of the body carrying the filaments, excluding bristles. If it cannot be measured, mark it unknown and include an end view. |
| Sleeve bore and mating shaft | Record the measured inside bore and actual mating shaft diameter. State whether a sleeve alone or a complete shafted assembly is required. |
| Sleeve body length | Measure the complete hollow core end to end, including unbristled portions. Keep this separate from the bristled face length. |
| Drive and retention details | Show keys, flats, threads, end plugs, clamps or other fixing features on a dimensioned end drawing; do not assume a round bore establishes fit. |
Photographs to include
- Photograph the full roller beside a scale, showing both ends without cropping.
- Provide a straight-on view of each end and a close view of the drive or retention feature.
- Show the tuft arrangement and identify the machine position where this roller is used.
Where it fits in the process
01
Textile shaft roller replacement
02
Lint and thread brushing positions
03
Matching stenter dust-cleaning rollers
Application examples describe the product family. Machine compatibility depends on the final specification.
Four details that make a better enquiry
- Record the backing, bore or drive profile.
- Measure the full working width and running length.
- State the fabric, machine position and contact requirement.
- Include cleaning conditions, temperature and required quantity.
For this product, pay particular attention to:
Actual shaft diameter and fit, drive key or clamp, brush face length and OD; required tuft pattern and trim.
Frequently asked questions
Is a hollow-core roller supplied with a through shaft?
A hollow-core format is intended to be matched to a shaft and drive arrangement. State whether the requirement is the brush sleeve alone or an assembled roller, then confirm bore, retention and working length.
Does the 20 mm bore identify every dimension of the roller?
No. It identifies the nominal central opening in the supplied product name. Confirm bore tolerance, drive details, face length and overall diameter on the drawing before ordering.
What information is needed to quote this hollow-core textile roller?
Send a sample or drawing, required quantity and the operating conditions. For this product, include: Actual shaft diameter and fit, drive key or clamp, brush face length and OD; required tuft pattern and trim.
Can the listed configuration be matched to my machine?
The listed options are starting configurations, not universal machine approvals. IndusBrush confirms the final dimensions, mounting and material specification against your drawing or sample before manufacture.
Replacement sleeve or a complete roller assembly?
A hollow-core brush needs a mating shaft, drive engagement and retention arrangement. Record sleeve body length separately from the working face and shaft length. A flexible brush belt follows a different running path.
- Flexible Tufted Brush Belt ↗
Compare the belt format if the bristles are carried by a moving backing.
- Wooden-Sleeve Industrial Roller Brush ↗
Compare the wooden-sleeve format only where the machine and process call for that construction.
Related terminology: hollow sleeve textile roller brush; hollow bore roller brush. Confirm the actual construction and fit, as similar names do not establish compatibility.
Export specification: textile shaft-mounted nylon roller replacement
Request this brush from IndusBrush, India, for textile shaft-mounted nylon roller replacement. Include the following details so the supplied configuration can be reviewed against your equipment.
- Actual shaft diameter, bore fit and brush face length
- Brush outside diameter, trim and tuft pattern
- Drive key, clamp or retention drawing and quantity
State sample and production quantities separately, with destination country and city or port. Packing, material documents, commercial terms and delivery arrangements are agreed in the quotation.
International ordering & export requirements ↗
Compare Textile brush applications ↗
Inspection & care
Check backing, joints, tracking and retained fibres with the machine isolated. Use a cleaning method compatible with the backing and fill.
Technical reading & application context
These independent references explain general brush technology. They do not certify or specify an IndusBrush product; the listed configurations and final quotation define the supplied item.
Explore the range
Textile Brushes
Explore product photographs and listed configurations, then share your machine requirements.
2 views
Textile
Tampico Fibre Brush Belt
Natural plant-fibre conveyor brush belt made with Mexican Tampico fibre.
Listed options1 ft catalogue length unit; finished belt length to specify
Explore product
Textile
Leather-Backed Natural Hair Brush Belt
Flat tufted brush belt with natural hair on a leather backing.
Listed options1 ft catalogue length unit; finished belt length to specify
Explore productHollow-Core Textile RollerGet a quote ↗